F.A.Q.
We know that buying a pool cover raises many questions. That’s why we’ve gathered here the answers to the most frequently asked questions about the Coverseal — its installation, maintenance, and much more.
You’ll find them below, organized by topic or accessible through the quick search.
General
No. All Coverseal models offer the same level of excellence in terms of safety, protection and reliability. The difference lies in the way they are used and the options that distinguish them, in order to meet the expectations and lifestyle of each owner.
Our Automatic model is easily controlled from a smartphone for maximum comfort and quick opening/closing. Our Semi-Automatic model, meanwhile, is equipped with a portable control unit that can be recharged from an electrical outlet, offering up to fifteen cycles of use before recharging.
Coverseal pool covers fit almost any pool model, regardless of shape or size. However, some parameters may prevent the installation of a Coverseal pool guard.
– A concave support
– A slope towards the inside of the pool
– Certain supports (hollow composite, slope > 4%, etc.)
Our technical department will be happy to assist you and answer your questions.
Yes, a Coverseal can be installed on most supports, including concrete, as long as it is in good condition and stable to ensure durable fixation.
We offer two types of rails to ensure optimal installation: the standard rail and the all-surface rail. Depending on the flatness of your concrete surface, our team will determine the most appropriate solution to maximize the strength and performance of your installation over time.
Yes, a Coverseal can be installed on most supports, including wood, provided that it is sufficiently durable and solidly anchored so as not to deform or move over time.
We offer two types of rails to ensure perfect fastening: the standard rail and the all-surface rail. Depending on the nature and density of your anchoring surface, our technical team will select the most suitable solution to ensure the longevity and performance of your installation.
Yes, it is quite possible to install a Coverseal on clinkers, provided that they are well laid, stable and do not show any movements or sagging. To ensure safe and durable anchoring, we have two rail systems: the standard rail and the all-surface rail. The latter has been developed for irregular anchoring surfaces such as clinkers and will, therefore, ensure the performance and durability of the installation.
Yes, it is possible to place a Coverseal on edge bricks, provided that they are securely sealed and have a stable surface. This ensures good hold of the fixation over time.
In this case, with edge bricks, the all-surface rail is preferred to guarantee a safe and durable attachment.
Yes, the installation of a Coverseal on a natural stone surface is perfectly feasible, provided that the slabs are well fixed and stable. This ensures secure anchoring and prevents any movement that may alter the fixation over time.
We offer two types of rails to fit the surface of your deck: the standard rail, used on flat surfaces, and the all-surface rail, preferred for uneven surfaces. Our technical teams will determine the most appropriate solution to ensure the robustness and longevity of your installation.
Yes, the installation of a Coverseal on a solid composite support is possible, provided that the structure is stable and properly attached so as not to deform over time.
We offer two rail solutions, standard and all-surface, to suit the characteristics of your support. In this specific case of a solid composite terrace, the all-surface rail is preferred to ensure optimal attachment to this surface.
Yes, the installation of a Coverseal on stoneware is quite possible, provided that the surface is stable and laid to prevent any movement or detachment over time.
We offer two rail systems, standard or all-surface, to ensure reliable anchoring. Depending on the flatness of your tile, our technical team will select the most appropriate technique to ensure the strength and durability of your cover.
Yes, our Product is designed with the highest safety standards in mind. Nevertheless, it is a safety cover and not a playground. We therefore strongly advise against letting children, adults or animals walk on the membrane, use it as a trampoline or use the trim as a diving board at the risk of damaging it.
Coverseal can also install an indoor pool cover, either by means of the Semi-Automatic model without providing a power supply, or with the Automatic model by providing an incoming feed.
Regardless of the model chosen, you preserve the quality of your water, optimally secure your pool and achieve significant energy savings.
Like any material exposed to UV, the membrane may undergo slight discolouration over time. This phenomenon, although natural, will be more pronounced on dark membranes.
The trim of the cover, meanwhile, is powder-coated. The paint is, therefore, very resistant over the long term and suited to the environment of the pool. However, just like a car body, there can be slight discolouration with sun exposure.
It is also possible to find trims with more specific finishes, namely a “mirror effect” or “metal effect”. In this case, the trim is made using composite panels. It is also a product that will go through the years without losing its quality.
Unlike other protection products, the Coverseal pool cover does not require any special intervention as winter approaches. Once installed, it remains fully functional without the addition of specific equipment for wintering. The only precaution: maintain the usual water level, so that it supports the membrane in case of heavy snowfall. This principle preserves the cover from any excessive stress.
A true 4-season product, Coverseal retains its elegance throughout the year and effectively protects your pool. In the spring, you enjoy preserved water: no clumps of leaves and limited photosynthesis!
Coverseal effectively limits photosynthesis, thus preserving the purity and balance of the water. By reducing the pool’s exposure to sunlight and impurities, it maintains more stable water indices, for water that is more pleasant to the touch and visually flawless.
This optimal protection also allows you to reduce the use of treatment products, which are often expensive, not very ecological and irritating to the skin, while prolonging the pleasure of healthy and comfortable swimming.
To the eye, the membrane presents impeccable tension, with only a slight technical bend of about 1 cm per meter of width. This tension, combined with centrally located drain holes, prevents any water stagnation, thus limiting the accumulation of dirt. Leaves deposited on the membrane are easily swept away by the wind.
Over time, the membrane retains its perfect hold, the initial bend does not increase. In areas with extreme weather conditions, it is even more important to maintain a normal water level so that the water supports the membrane during heavy snowfall and preserves its aesthetics.
Yes, your pool stays clean once protected with a Coverseal cover. Unlike submerged or above-ground shutters, our cover does not plunge into the water: its stretched membrane acts as a barrier against external dirt.
Leaves, dust or other impurities do not stagnate on the surface, they are naturally swept away by the wind, avoiding the formation of dirty puddles as is often the case with a conventional tarpaulin. Result: cleaner water, longer, with less maintenance.
- Delete and reinstall the mobile app: Click here for IPhone and here for Android. On first start, allow the use of Bluetooth. The cover can only be connected to one phone at a time.
- Connect close to your cover: If an update is available, the app will guide you step by step. Follow the instructions displayed on the screen. You may need to unplug and then reconnect the power cables. Refer to the provided video if necessary.
- If the “Firmware Installation” or “Cover Check” step loops for more than 2 minutes, follow these steps:
- Close the app completely
- Unplug both black power cables
- Wait 5 seconds
- Reconnect the cables, ensuring they are properly inserted
- Restart the app and repeat step 2
The “Cover check” phase may no longer appear: this is normal. It means the board has restarted correctly. If the update still fails or if the problem persists, contact our technical support.
- Check the power supply: open the side hatch and check that the power connectors (the black cables) are properly seated: from the solar panel (lower cable) and the battery (upper cable). If the cover remains undetectable in the app or if it does not move, proceed to the next step.
- Reinstall the mobile app: reinstall the mobile app: delete it and then install it again. Click here for IPhone and here for Android. When opening for the first time, remember to allow access to Bluetooth. Ensure that only one phone is connected to the cover and finally connect close to it. It is possible that your cover requires an update. In that case, a banner will appear directly in the app. A restart of the board may be necessary; to do this, simply unplug then plug back in the cover’s power cables. Refer to the attached video.
- Test without the solar power supply: unplug the cable from the solar panel (lower black cable). Then try with the wired control or the Open/Close buttons: if the buzzer remains silent, it is probably the fuse (proceed to step 4). If the buzzer sounds but the cover remains still or jerky, it is probably the battery.
- Replace the fuse:
- Fuse version 1: disconnect the two black cables, open the electronic box with a small screwdriver and replace the fuse with the supplied 20A fuse (inside the box). Reconnect, test the cover over 1 m with the buttons or wired control, then reconnect via the app if everything works. Reconnect and test.
- Fuse version 2: open the side hatch and disconnect the two black power cables. First check the battery fuse (at the bottom) and replace it if damaged. Reconnect and test. If the problem persists, check the motor fuse (at the top), replace it, if necessary, then reconnect the cables and restart the application.
If the problem still persists after all these steps, contact your Installer.
No. Each Coverseal cover is completely custom-designed, according to the specifics of your pool, your environment, and your aesthetic preferences. No predefined format: each configuration is customized in every detail, to guarantee perfect integration and optimal protection without compromise.
This approach not only optimizes the safety and performance of the system, but also preserves the visual harmony of your exterior. The Coverseal adapts to your space without being imposing.
When the sunny days return, your pool is ready to use, effortlessly.
There are 2 types of rails, namely standard rails and all-surface rails. In most cases, the standard rails are installed. Their 36 mm wide by 10 mm high profile has been specially designed to remain discreet and integrate harmoniously with the pool environment. However, there is another type of rail, namely the all-terrain rail, that can be adapted to supports that lack density or flatness. In addition, the rails are never empty: the belt is always integrated, guaranteeing maximum safety and avoiding any risk of unpleasant contact.
The photovoltaic panel(s) remain efficient regardless of weather conditions. However, in countries where the brightness is particularly low or limited during the day, especially on short days in Scandinavia, it is possible to install an additional panel to guarantee perfect autonomy. At Coverseal, we are convinced that the climate must never compromise the use, safety or protection of your pool.
Coverseal is a bespoke 4-season pool cover, designed to provide optimal and long-lasting protection for your pool. Combining technology, design and ease of use, it guarantees clean and preserved water throughout the year, while enhancing your outdoor space. A high-end product that combines safety, aesthetics and everyday comfort.
The expected life of the batteries on the Automatic and Semi-Automatic models is about 4 to 6 years under normal conditions of use. However, during exceptional weather conditions (very high or very low temperatures), the service life of these batteries may be degraded. For Automatic models equipped with a winterization switch (previous version to 2025), it is important not to forget to set it to “off” from 1 September to 1 May. During this period, as there is insufficient sunlight, the batteries could then fall into deep discharge and they would have to be replaced.
Unfortunately, too many factors are taken into account to establish an accurate theoretical calculation of the insulation value of the Coverseal (delta T°, air mass trapped under the membrane, wind, rain, etc.). Therefore, it is not possible to quantify it, but the Coverseal ensures an almost perfect seal, blocking almost all evaporation. This significantly reduces heat loss, which leads to real energy savings and limits the need for water filling, for more sustainable and economical management of your pool.
Cylinders are an option available on the Automatic model, the primary purpose of which is to allow the Coverseal to overcome larger obstacles effortlessly, while optimising the tightness of the cover. Cylinders help preserve water quality by limiting the intrusion of impurities and conserving heat. Beyond their technical function, they also offer an elegant finish: the cover is delicately placed on the ground in a fluid and discreet gesture that demonstrates the high-end quality of your installation.
Distinctive detail: an Automatic model equipped with cylinders can be recognized by its square box, as opposed to a rectangular shape for the version without cylinders.
Coverseal pool covers are designed with premium materials. The wear of the membrane depends mainly on climatic conditions, the maintenance provided and the daily use.
It can therefore be estimated that a membrane replacement will be necessary after 10 to 12 years, depending on the environment and climate of the country where the Coverseal is installed (frost, snow, extreme heat, sand-laden wind, etc.). An essential point, however, is regular cleaning of the rails. Indeed, the presence of sand or abrasive particles in the rails can accelerate the wear of the mechanical parts and, ultimately, the membrane.
Coverseal pool covers have been manufactured in Belgium for more than 15 years and have globally recognized patents. They are commercialised by many Partners in different European countries (Belgium, Netherlands, Luxembourg, France, Spain, Italy, Switzerland, Germany, Austria, Norway,etc.) as well as in the Middle East and the United States.
When manufacturing your pool cover, the climatic conditions of the pool cover installation will be taken into account. High or low temperatures, frost or heavy snowfall are all factors that Coverseal has taken into account when designing its Product. Thus, your pool is protected throughout the year and regardless of its location.
A winter cover protects your pool in cold weather, but it remains a seasonal solution, designed above all for stopping use. The Coverseal, on the other hand, is a four-season system that offers optimal protection all year round.
Thanks to its membrane stretched over the water, it prevents leaves, dust and other debris from polluting the pool, limits photosynthesis and preserves water quality. It also retains the accumulated heat and enhances the safety of your swimming area.
In other words, while the winter tarpaulin plays a limited role, the Coverseal combines aesthetics, performance and durability throughout the year.
Unlike a submerged or above-ground pool shutter, the Coverseal is a true 4-season product. It provides optimal protection all year round, offering more cleanliness, safety and insulation than any shutter on the market.
While a shutter floats directly on the water, inevitably letting leaves and debris fall back into the pool when it opens, the Coverseal, stretched over the edges, protects your pool from impurities.
Compared to a shutter with solar blades, the difference is in the insulation: while the blades can significantly increase the temperature of the water, the Coverseal traps the accumulated heat without requiring additional protection.
Finally, its design severely limits photosynthesis, thus preserving water quality and reducing the use of treatment products that are often expensive, unfriendly to the environment and irritating to the skin.
Choosing a Coverseal means offering yourself high-end protection that combines safety, performance and elegance. Its innovative design effectively protects water from dirt and temperature variations, while reducing the consumption of water, energy and cleaning products. Easy to use and perfectly integrated into your environment, it ensures optimal comfort throughout the year, for a pool that is always clean and ready to use at any time.
Opting for a Coverseal also means choosing a Belgian company that places innovation at the heart of its know-how and favours the short circuit by collaborating with trusted local Partners.
Unlike a swimming pool enclosure, a Coverseal offers real comfort in everyday use. Certainly, some shelters allow you to swim underneath them, but their handling is much less practical. In addition, a shelter is often voluminous and imposes its presence, while a Coverseal, thanks to its minimalist and 100% customizable design, blends harmoniously into your environment.
It also limits photosynthesis, which preserves water quality, significantly reduces the use of chemicals, and allows you to enjoy healthier water.
.
Practical questions
Yes, by reducing the intensity of the spray and using a neutral pH soap. Special attention should be paid to rails where regular cleaning is essential to ensure the performance and longevity of your cover. For the trim, we recommend using a microfiber cloth to preserve its appearance and durability.
The membrane that strongly limits photosynthesis and prevents leaves from falling into your pool should keep you from having to resort to shock treatments to purify your pool water. Nevertheless, under exceptional circumstances, this type of treatment may be considered. However, it is strongly recommended to keep the Coverseal open for 24 to 48 hours, to avoid any excessive concentration of chemicals that could damage the membrane.
No. Repeated shocks or excessive pressure may cause deformation of the trim or damage to the mechanics. Such damage is not covered by the warranty.
Yes, on the latest versions of the Automatic model, it is now possible to control your Coverseal from a smartphone while keeping a direct view of the cover when handling it, for safety reasons. The dedicated application also allows you to consult technical parameters such as:
– the charge level of the batteries,
– the number of opening/closing cycles performed,
– the history and details of alarms in the event of malfunction.
For previous versions, an upgrade is possible in order to activate the opening and closing control via your smartphone. We recommend that you contact your Partner directly for more information.
It is not necessary to walk on it to clean the membrane: a low-pressure cleaner (set to moderate power) or a telescopic handle is more than enough. However, you can walk on top of them barefoot or with flat-soled shoes, without any risk.
A quick reminder: the Coverseal provides effective protection in the event of an accidental fall, but it is not designed to be used as a playground.
Our covers do not require any special technical maintenance. However, it is strongly recommended to carry out regular cleaning of the rails and mechanism to remove any accumulation of sand, soil, leaves, branches or other dirt that may affect proper functioning and life of the cover.
In addition, it is necessary to respect the rules stated in the user manual, such as maintaining the appropriate water level in your pool, in order to preserve the safety of the cover.
- Delete and reinstall the mobile app: Click here for IPhone and here for Android. On first start, allow the use of Bluetooth. The cover can only be connected to one phone at a time.
- Connect close to your cover: If an update is available, the app will guide you step by step. Follow the instructions displayed on the screen. You may need to unplug and then reconnect the power cables. Refer to the provided video if necessary.
- If the “Firmware Installation” or “Cover Check” step loops for more than 2 minutes, follow these steps:
- Close the app completely
- Unplug both black power cables
- Wait 5 seconds
- Reconnect the cables, ensuring they are properly inserted
- Restart the app and repeat step 2
The “Cover check” phase may no longer appear: this is normal. It means the board has restarted correctly. If the update still fails or if the problem persists, contact our technical support.
Regardless of the model, your pool cover can always be opened or closed manually. Even in the event of a battery failure, there is always a solution! However, the manual manoeuvre should only be used in the event of a power failure and should not be used to loosen your cover.
1. Remove the 2 flaps (one on each side of the trim). For modules without cylinders, go directly to point 3.
2. Lift the trim on each side until you hear the click.
3. Identify the red motor cable and disconnect it.
4. Identify the manual manoeuvring flange and insert the extension provided during installation.
5. Place the racagnac (ratchet wrench) at the end of the extension, and adjust the knob to the desired position.
You can now operate the system to open or close the cover. To put your cover back in place, reverse the steps from 5 to 1. To lower the trim (only on models equipped with cylinders), actuate the two levers inside it by lifting it slightly before lowering it again.
For the membrane
We recommend cleaning it at least twice a year, depending on the pool’s surroundings (presence of trees, sand, soil, urban pollution, etc.). In any case, a cleaning should be carried out before the first opening and restart of the pool.
The cover must be completely closed and locked before cleaning. Ideally, use a brush and a domestic low-pressure washer, limiting the pressure to 80 bars. The washer should be used with a product that has a neutral pH.
For the cladding
Galvanized steel or aluminum claddings are powder-coated. To clean them, use only a microfiber cloth, clear water, and, if necessary, a neutral pH soap.
For mirror-effect or metallic claddings, monthly cleaning is recommended. Impurities should be removed from top to bottom using a low-pressure water jet. A mild cleaner (without alcohol or ammonia) should be applied with a lint-free microfiber cloth, using linear movements. Circular motions are strictly forbidden, as they may cause streaks or halos. The surface should then be rinsed with clear water and immediately dried with a soft cloth to preserve its shine.
Essential technical maintenance
Regular and careful maintenance of the rails and locking components located under the cladding will extend the lifespan of your cover. Start by removing debris (sand, leaves, branches, soil, etc.) using a vacuum/blower. If necessary, follow up with a water jet, taking care not to push debris into the rail ends.
To clean inside the rails, lift the belt (black strip) when the cover is rolled up (pool open). A high-pressure washer can be used, then reposition the belt correctly after cleaning.
For Automatic models
Regular cleaning of the solar panels helps extend battery life. To do this, use only a microfiber cloth and clear water.
Download the Coverseal app: Click here for IPhone and here for Android.
If you already have an account:
- Check that your phone is properly connected to the internet. Log in with your ID (the email address used during installation) and your password. If you have forgotten your password, click on ‘Forgot password’. You will then receive a 6-digit code by email (wait up to 1 minute). If you do not receive it: check your spam or confirm that the address is correct. If you still receive nothing, contact us!
- Enter your 6-digit code. If the message “Token has expired” appears, you may have requested a new code too soon. If this is the case, wait 2 minutes, delete all emails from noreply@coverseal.com, request a new code and if the problem persists, contact us.
- Lastly, once you have received the code, create a new password (minimum 8 characters, including 1 number and 1 special character).
If you do not yet have an account:
- Your phone must be connected to the internet. You must be invited by an installer or the cover owner. If you are a guest, contact the owner. If you are the owner, contact your Installer.
- The owner can verify if the email address used is correct via: cover details > users
- Check the power supply: open the side hatch and check that the power connectors (the black cables) are properly seated: from the solar panel (lower cable) and the battery (upper cable). If the cover remains undetectable in the app or if it does not move, proceed to the next step.
- Reinstall the mobile app: reinstall the mobile app: delete it and then install it again. Click here for IPhone and here for Android. When opening for the first time, remember to allow access to Bluetooth. Ensure that only one phone is connected to the cover and finally connect close to it. It is possible that your cover requires an update. In that case, a banner will appear directly in the app. A restart of the board may be necessary; to do this, simply unplug then plug back in the cover’s power cables. Refer to the attached video.
- Test without the solar power supply: unplug the cable from the solar panel (lower black cable). Then try with the wired control or the Open/Close buttons: if the buzzer remains silent, it is probably the fuse (proceed to step 4). If the buzzer sounds but the cover remains still or jerky, it is probably the battery.
- Replace the fuse:
- Fuse version 1: disconnect the two black cables, open the electronic box with a small screwdriver and replace the fuse with the supplied 20A fuse (inside the box). Reconnect, test the cover over 1 m with the buttons or wired control, then reconnect via the app if everything works. Reconnect and test.
- Fuse version 2: open the side hatch and disconnect the two black power cables. First check the battery fuse (at the bottom) and replace it if damaged. Reconnect and test. If the problem persists, check the motor fuse (at the top), replace it, if necessary, then reconnect the cables and restart the application.
If the problem still persists after all these steps, contact your Installer.
This makes it possible to guarantee the safety of your loved ones and the good condition of the cover by directly detecting if someone is in the pool or if any obstacles are on the membrane (branches, wipes, ball, etc.).
It is a pre-stressed membrane coated with several layers of polymer, capable of supporting several tons and recovering its initial shape after deformation. It is, therefore, a solution that guarantees safety and tranquillity for the whole family.
On previous generations of Automatic models, the winterization switch allowed you to disable the remote control receiver to preserve the batteries during the low season, when the sunshine is lower. It is recommended to place it in the OFF position from 1 September to 1 May. Otherwise, the batteries could fall into deep discharge and require replacement.
Note: on the latest versions of this model, this switch is no longer present, because energy management has been optimized.
All you need to do is:
– close the cover completely
– maintain the water level of your pool according to the instructions in the user manual;
– clear the solar panel(s) of the Automatic model in case of heavy snowfall to maintain a good charge of the batteries
– set the winterization switch to off in order to preserve the batteries (previous versions of the Automatic model)
Thanks to the membrane, photosynthesis is strongly limited: no noticeable dirt is found in the spring. For optimal results, it is advisable to run the filtration only a few hours a day during wintering.
After-sales service
Yes. If you notice any operational anomaly or unusual visual aspect (abnormal noise, irregular movement, unusual membrane tension, etc.), we strongly recommend that you stop operating your Coverseal immediately.
In this case, please contact us as soon as possible, and send photos and/or videos showing the issue. This will help us quickly analyze the situation and provide an appropriate solution.
First, make sure that nothing is obstructing your Coverseal’s operation (objects, tree branches, dirt) and that the required water level is properly maintained. Then, follow the steps below:
Automatic model (with one or two solar panels)
-
For earlier versions, check that the winter switch located inside the cladding is set to ON before using the remote control. It is also possible that the transmitter battery is dead (it’s easy to replace).
-
After confirming that the switch is ON and the transmitter battery is working properly, press both buttons simultaneously on the wired control.
-
If the problem persists, your main battery is likely discharged. First, use the manual operation to secure your pool, then contact us as soon as possible at support@aquaguard.co.il.
Semi-Automatic model
-
Check that the remote control battery is fully charged.
-
If the issue continues, the main battery may be discharged. You can use the manual operation to secure your pool, then contact us as soon as possible at support@aquaguard.co.il.
Manual model
For any questions, please refer directly to the user manual or contact us at support@aquaguard.co.il.
Request your catalogue
"*" indicates required fields